Skip to main content Skip to navigation

An electrician walking out of a supply store with an organized cable cart, headed to his work van.Can you remember a moment when you had too much time on your hands? If you’re in the trades, the answer is “probably not.” When you’re putting in 10-12 hour days on the job, you sometimes need all the help you can get, and even the smallest hack can turn into a genius moment. Below we’ve listed 6 time-saving tips for electricians. Any one of these could just be your next light-bulb moment.

Time-Saving Tips for Electricians

Never underestimate the power of the (magnetic) force:

  • A good magnet can be one of the most versatile tools in your box.
  • It can double-duty as a stud finder that doesn’t run out of batteries.
  • When fishing wire down a wall, tie it to a heavy nut or another magnet attached to a pull string. Use the magnet’s power of attraction to guide the other magnet or nut (the one attached to the wire) to your box opening.
  • Are your arms too short to reach that small tool or bolt you dropped behind a heavy piece of equipment? Fish for it with a magnet on a string!
  • For electricians working at heights on scissor lifts or “cherry pickers,” a magnet attached to your machine can be a handy device for small tools or metal supplies.

Potato peelers – they’re not just for spuds anymore

A potato peeler as a quick and inexpensive tool for stripping wires. Flatten the wire against a piece of wood and peel away! (Mind your fingers, though.)

 

Got milk crates?

Want an easy trick for pulling wires? Run a dowel or a piece of conduit through the center of the spool and suspend it in a milk crate. Feed the wire through one of the holes and you’ve got an easy-to-use wire dispenser.

 

Here’s one idea you can cut your teeth on, literally

A busy electrician can go through a stack of cutting blades in a month. Instead of buying a new blade every time one is too dull to use, sharpen what’s left of the teeth or cut new ones with a rotary tool. Re-cutting the teeth only takes a minute or two, and you’ll be surprised at how much money you’ll save.

Pro Tip: Be sure to wear eye protection and any appropriate safety gear while you’re doing it because sparks will fly!

 

Plug and play

This tip is especially handy when you’re doing remodeling work, where the breaker box might not be marked properly (or at all). When you’re by yourself and don’t have your circuit identifier, plug your radio into the circuit and crank up the volume. Now go down to the basement and start flipping breakers until you hear – or stop hearing – the sound. No radio? Use your wet/dry vac!

Snap a circuit selfie

Use your cell phone to take pictures of anything you’re going to take apart, so you’ll know how to put it back together.

 

Want more time- and money-saving ideas? Connect with Adrian Steel!

You’ll be the first to find out about our latest product news, and you’ll learn tips and tricks to help keep your business running smoothly.

 

Find an Adrian Steel Distributor by clicking on this button.

Connect with Adrian Steel on social media!

Facebook | LinkedInYouTube | Twitter

With hundreds of expert distributors across North America, and dedicated sales reps for national customers, we’ve got you covered!

Where To Buy